▎2：1 THIN WALL HEAT SHRINK INSULATION RUBBER TUBE
thin wall heat shrink tubing made from polyolefin, with a 2:1 shrink ratio, which is thinner than general heat shrink, have lower shrinking temperature and faster shrinkage speed, but keep the same functions.
▎PRODUCT FEATURES
Thin Wall Heat Shrink Tube can be heat‑shrinked by lighters and hot air guns. Has high strength and toughness, can be bent at will after heat shrinking.
▎PHYSICAL PROPERTIES
| Material | Silicone rubber |
| Shrink Ratio | 1.7:1 |
| Working Temperature | -40℃ to 200℃ |
| Start Shrink Temperature | 90℃ |
| Minimum Complete Shrink Temperature | 170℃ |
| Longitudinal Shrinkage | 5% |
| Flammability | VW-1 |
| Standard Color | Black |
| Colored | Available |
| Certification | UL,ROHS,Reach,Halogen free |
| Shrinking Tool | Hot Gun,Oven |
| Cutting Tool | Scissor |
▎DATA SHEET
DATASHEET | ||||||
PART NO | UNSHRINK SIZE(MM) | SHRINK RATIO | AFTER SHRUNK SIZE(MM) | PACKING | ||
DIA(D) | THICKNESS(T) | DIA(d) | THICKNESS(t) | |||
MJ-HST-T-1.0 | 1.50±0.3 | 0.12±0.05 | 2:1 | ≦0.65 | 0.20±0.10 | 400m/spool |
MJ-HST-T-1.5 | 1.90±0.3 | 0.13±0.05 | ≦0.85 | 0.20±0.10 | 400m/spool | |
MJ-HST-T-2.0 | 2.35±0.3 | 0.15±0.05 | ≦1.00 | 0.22±0.10 | 400m/spool | |
MJ-HST-T-2.5 | 2.80±0.4 | 0.15±0.05 | ≦1.30 | 0.25±0.10 | 400m/spool | |
MJ-HST-T-3.0 | 3.40±0.4 | 0.15±0.05 | ≦1.50 | 0.28±0.10 | 400m/spool | |
MJ-HST-T-3.5 | 3.80±0.4 | 0.15±0.05 | ≦1.80 | 0.28±0.10 | 400m/spool | |
MJ-HST-T-4.0 | 4.40±0.4 | 0.18±0.05 | ≦2.00 | 0.35±0.10 | 400m/spool | |
MJ-HST-T-4.5 | 4.70±0.4 | 0.18±0.05 | ≦2.30 | 0.35±0.10 | 200m/spool | |
MJ-HST-T-5.0 | 5.50±0.4 | 0.18±0.05 | ≦2.50 | 0.37±0.10 | 200m/spool | |
MJ-HST-T-6.0 | 6.50±0.4 | 0.20±0.05 | ≦3.00 | 0.39±0.10 | 200m/spool | |
MJ-HST-T-7.0 | 7.50±0.4 | 0.18±0.05 | ≦3.50 | 0.32±0.10 | 200m/spool | |
MJ-HST-T-8.0 | 8.50±0.5 | 0.18±0.05 | ≦4.00 | 0.32±0.10 | 200m/spool | |
MJ-HST-T-9.0 | 9.50±0.5 | 0.18±0.05 | ≦4.50 | 0.35±0.10 | 200m/spool | |
MJ-HST-T-10.0 | 10.50±0.5 | 0.18±0.05 | ≦5.00 | 0.35±0.10 | 200m/spool | |
MJ-HST-T-11.0 | 11.50±0.5 | 0.18±0.05 | ≦5.50 | 0.40±0.10 | 200m/spool | |
MJ-HST-T-12.0 | 12.50±0.5 | 0.20±0.05 | ≦6.00 | 0.40±0.10 | 200m/spool | |
MJ-HST-T-13.0 | 13.50±0.5 | 0.20±0.05 | ≦6.50 | 0.40±0.10 | 200m/spool | |
MJ-HST-T-14.0 | 14.50±0.5 | 0.20±0.05 | ≦7.00 | 0.40±0.10 | 200m/spool | |
MJ-HST-T-15.0 | 15.50±0.5 | 0.20±0.05 | ≦7.50 | 0.40±0.10 | 200m/spool | |
MJ-HST-T-16.0 | 16.50±0.5 | 0.22±0.05 | ≦8.00 | 0.40±0.10 | 200m/spool | |
MJ-HST-T-18.0 | 18.50±0.5 | 0.22±0.05 | ≦9.00 | 0.45±0.10 | 200m/spool | |
MJ-HST-T-20.0 | 20.50±0.5 | 0.22±0.05 | ≦10.00 | 0.45±0.10 | 200m/spool | |
MJ-HST-T-22.0 | 22.80±0.5 | 0.22±0.05 | ≦11.00 | 0.45±0.10 | 200m/spool | |
MJ-HST-T-25.0 | 25.50±0.5 | 0.22±0.05 | ≦12.50 | 0.45±0.10 | 200m/spool | |
▎APPLICATIONA
heat shrink rubber tube is ideal for a wide range of applications like electrical insulations, mechanical protection, and marking, like electrical insulation, wire bundling, color coding, lightweight harnessing, and wire strain relief.
▎QUALITY CONTROL
Cost Of Poor Quality:<2.5%
On-Time Delivery:100%
Custom Satisfaction:>98%
Delivery (ppm)<900
Delivery (ppm)<35 (for automobile customer)
